You can follow the instructions for adding a fingerprint in the manual that comes with your lock or check out our ‘How To’ videos. You can also follow the instructions below:
Note: an ADMIN fingerprint will be required to authorize the registration of new fingerprints. We recommend that all users register at least 3 fingerprints to ensure that they have a backup if the sensor fails to recognize one.
Instructions:
- Use the setting needle (Item ‘K’ in your part’s list) to press the SET button. The SET button is located at the end of the handle on the internal side of the lock. Press the button once, and 1 beep will sound and the LED light will turn BLUE
- Press the fingerprint sensor with a registered ADMIN fingerprint. You will hear a long beep and the LED light will flicker GREEN, then turn BLUE. The lock is now ready to register a new fingerprint. (Note: if three beeps sound and the LED turns off, the authorization was unsuccessful, and you need to repeat the process.)
- Briefly place your finger/thumb on the fingerprint sensor and the REMOVE it once you have heard a double beep. Repeat this process three (3) more times until the LED light turns GREEN.
- When adding a new fingerprint, remember to record your fingerprint at different angles to increase the fingerprint reader accuracy.
Your USER fingerprint is now registered.
